Technical Manual

Chapter 5 - Configuration Via Web Interface Spectrum Analyzer
Alvarion BreezeNET B300 77 Technical User Manual
 Band - bandwidth in MHz.
 Step - frequency changing step in MHz.
 Channel mask - specify what antenna will scan the radio environment. "Auto"
value set scanning by both antennas.
To start/stop "Spectrum Analyzer" use "Start Sensor Test"/"Stop Sensor Test"
buttons.
You can get detailed information about scanned radio signals on a specific
frequency. Just point a cursor on the needed frequency and you will see a hint
with exact Signal level (dBm), Frequency (MHz), Noise Floor (dBm), Avg RSSI
(dBm), High RSSI (dBm), Max RSSI (dBm) values.