User's Manual

112 Operation
Chapter 4 - Operation
4.11 SU Parameters Summary
Table 4-2: SU Parameters Summary
Parameter Range Default Run-Time
Updated
Unit Control Parameters
Password Up to 20 printable characters,
case sensitive
installer No
TFTP Server IP Address IP address 192.168.254.250 Yes
SW File Name Yes
Ethernet Port Auto Negotiation
Enable/Disable
 Disable
 Enable
Enable No
Ethernet Port Speed and Duplex
 10Mbps,
 Half-Duplex10Mbps,
 Full-Duplex100Mbps,
 Half-Duplex100Mbps,
 Full-Duplex
No
Registration Parameters
User Name Up to 32 printable characters,
case sensitive
User Password Up to 32 printable characters,
case sensitive
Organization Name Up to 32 printable characters Empty Yes
Address Up to 32 printable characters Empty Yes
Country Up to 12 printable characters Empty Yes
BST/AU ID Parameters
BST/AU ID 6 groups of up to 3 digits each.
Each group range is 0-255.
186.190.0.0.250.206 No
BST/AU ID Mask 6 groups of up to 3 digits each.
Each group range is 0-255.
0.0.0.0.0.0 No
Best BST/AU Support
 Disable
 Enable
Enable No