User's Manual
Table Of Contents
- BreezeMAX CPEs Product Manual
- About This Manual
- Contents
- Figures
- Tables
- Chapter 1 - Products Description
- 1.1 BreezeMAX CPEs
- 1.2 Introducing BreezeMAX PRO-S CPE
- 1.3 Introducing BreezeMAX Si CPE
- 1.4 Voice and Networking Gateways
- 1.5 PRO-S CPE Specifications
- 1.6 Si CPE Specifications
- Chapter 2 - Installation
- 2.1 Installing the ODU of the PRO-S CPE
- 2.2 Installing the IDU-1D Indoor Unit of the PRO-S CPE
- 2.3 Installing the Si CPE
- 2.4 Installing the 3.5 GHz Detached Antenna
- 2.5 Installing the 2.3/2.5 GHz Detached Antenna
- Chapter 3 - Commissioning
- Chapter 4 - Operation
- 4.1 The SU Installer Monitor Program
- 4.2 Using the Monitor Program
- 4.3 The Main Menu
- 4.4 Unit Control Menu
- 4.5 Registration Parameters Menu
- 4.6 BST/AU ID Parameters Menu
- 4.7 Radio Parameters Menu
- 4.8 Multirate and ATPC Parameters Menu
- 4.9 Performance Monitoring Menu
- 4.10 FDD Parameters (3.3/3.5/3.6 GHz units only)
- 4.11 SU Parameters Summary
- Appendix A - The Web Configuration Server
- Appendix B - Troubleshooting
- Glossary
Configuring Basic Parameters
BreezeMAX CPEs Product Manual 59
3.2 Configuring Basic Parameters
3.2.1 The Basic Parameters
Table 3-1: SU's Basic Parameters
Parameter Default Value Comment
Ethernet Port auto Negotiation
Enable/Disable
Enabled Applicable only to E-model units (with Ethernet
interface).
Ethernet Port Speed and Duplex Applicable only to E-model units (with Ethernet
interface). Applicable only if Ethernet Port Auto
Negotiation Enable/Disable is set to Disable
User Name Null, changed
automatically to MAC
address if not configured
to any other value
Should be supplied by system administrator
User Password quickynikynyoky Should be supplied by system administrator
Organization Name Optional - according to administrator policy
Address Optional- according to administrator policy
Country Optional- according to administrator policy
BST/AU ID 186.190.0.0.250.206
BST/AU ID ID Mask 0.0.0.0.0.0
Preferred BST/AU ID 186.190.0.0.250.206
Preferred BST/AU ID Mask 0.0.0.0.0.0
Set Mobility Mode nomadic
Bandwidth 3.5 MHz
Antenna (Si CPE only) Automatic
Scanning Start Frequency Depend on Radio Band
and Bandwidth
Scanning End Frequency Depend on Radio Band
and Bandwidth
Scanning Main Step 875 KHz
Scanning Intermediate Steps Enable for all eight Steps
Discrete Frequencies None
Rx Attenuator (2.3 GHz units
only)
0