User's Manual
Table Of Contents
- BreezeMAX CPEs Product Manual
- About This Manual
- Contents
- Figures
- Tables
- Chapter 1 - Products Description
- Chapter 2 - Installation
- 2.1 Installing the ODU of the PRO-S CPE
- 2.2 Installing the IDU-1D Indoor Unit of the PRO-S CPE
- 2.3 Installing the Si CPE
- 2.4 Installing the 3.5 GHz Detached Antenna
- 2.5 Installing the 2.3/2.5 GHz Detached Antenna
- Chapter 3 - Commissioning
- Chapter 4 - Operation
- 4.1 The SU Installer Monitor Program
- 4.2 Using the Monitor Program
- 4.3 The Main Menu
- 4.4 Unit Control Menu
- 4.5 Registration Parameters Menu
- 4.6 BST/AU ID Parameters Menu
- 4.7 ˘Radio Parameters Menu
- 4.8 Performance Monitoring Menu
- 4.9 Multirate and ATPC Parameters Menu
- 4.10 ˘SU Parameters Summary
- Appendix A - The Web Configuration Server
- Appendix B - Troubleshooting
- Glossary
104 Operation
Chapter 4 - Operation
BST/AU ID Mask 6 groups of up to 3 digits
each. Each group range is
0-255.
255.255.255.0.0.0 No
Best BST/AU Support Disable
Enable
Disable No
Preferred BST/AU ID 6 groups of up to 3 digits
each. Each group range is
0-255.
186.190.0.0.250.206 No
Preferred BST/AU ID Mask 6 groups of up to 3 digits
each. Each group range is
0-255.
255.255.255.0.0.0 No
Radio Parameters
Bandwidth 1.75 MHz
3.5 MHz
5 MHz
7 MHz
10 MHz
Actually available options
depend on HW
Depend on HW No
Uplink (Tx) Frequency
(Standard Mode)
Depends on the Radio Band
and Bandwidth
Depends on Radio
Band
No
Antenna Selection(Si CPE) 1 - 6 (Internal)
7 (External)
5 8 (Automatic
3Yes
Scanning Start Frequency Depend on Radio Band and
Bandwidth
Yes
(after Update
Scanning
Table
Table 4-2: SU Parameters Summary
Parameter Range Default Run-Time
Updated