User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 178 System Manual
4.3.4.3.4 Restoring the Configuration Defined in the Backup Configuration File
You can, at any time, restore configuration from the backup configuration file. (To
display a list of currently stored backup files, refer to Section 4.3.4.3.6.) Run the
following command to specify the backup file to be restored:
npu# restore-from-local-backup <local-restore-filename>
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<hh:mm> Indicates the time at which
the system should
automatically create a backup
of the current configuration,
everyday.
Mandatory 00:00 HH:MM
(Enter the time
in the 24-hour
format)
Command
Modes
Global configuration mode
IMPORTANT
After executing this command, reset the system to restore configuration from the backup
configuration file. For more information about resetting the system, refer to
Section 4.2.2.1.
IMPORTANT
If you have stored the backup file on an external server, you can download the backup file from the
external server, and reset the system to apply the configuration defined in the downloaded file. For
details about downloading the configuration file from an external server, refer Section 4.3.4.2.
Command
Syntax
npu# restore-from-local-backup <filename>
Privilege
Level
10