User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 152 System Manual
4.3.2.1.3.3 Deleting a VLAN Translation Entry
To delete an existing VLAN translation entry, run the following command:
npu(config-if)# no vlan mapping {all | <integer(11-4094)>
<integer(11-4094)>}
Specify all if you want to delete all the VLAN translation mapping entries. Specify
the VLAN identifiers of the translation entry if you want to delete a specific VLAN
entry.
IMPORTANT
An error may occur if:
 The VLAN ID or mapping that you have specified is not within the range, 11-4094 or it does not
exist.
 You are trying to delete a VLAN translation entry for a VLAN that is not a member of this
physical interface.
Command
Syntax
npu(config-if)# no vlan mapping {all | <integer(11-4094)>
<integer(11-4094)>}
Privilege
Level
10