User Manual

Chapter 4 - Operation and Administration Using the CLI Managing AUs
4Motion 481 System Manual
4.5.6.4 Displaying Configuration Information for AU Reserved
Parameters
To display configuration information for the reserved parameters of a specific or
all AU objects, run the following command:
npu# show au-reserved au [<(1 to 4 StepSize 1) | (7 to 9 StepSize 1)>]
Specify the au slot ID (1-4, 7-9) if you want to display configuration for a
particular AU. Do not specify a value for this parameter if you want to view
configuration for all existing AU objects.
InternalManagementIPAddress IP Address of the
internainterface of the AU.
Acquired via DHCP.
IP address
InternalManagementIPSubnetMask Subnet Mask of the
internainterface of the AU.
Acquired via DHCP.
Subnet mask
Command
Syntax
npu# show au-reserved au [<(1 to 4 StepSize 1) | (7 to 9 StepSize 1)>]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[<(1 to 4 StepSize 1) | (7
to 9 StepSize 1)>]
The slot ID of the AU
Specify a value for this
parameter if you want to
display the reserved
parameters of a specific AU.
Do not specify a value for this
parameter if you want to
display the
reserved
parameters of all AUs.
Optional N/A 1-4, 7-9