User Manual

Chapter 4 - Operation and Administration Using the CLI Managing AUs
4Motion 477 System Manual
In addition to the configurable parameters, the following status parameters are
also displayed:
Display
Format
(for each
existing AU
object if
requested
for all AUs)
SlotNo. :<value>
RequiredType :<value>
RequiredPorts :<value>
RequiredBandwidth(MHz) :<value>
InstalledStatus :<value>
InstalledType :<value> (0 for notinstalled AU)
InstalledPorts :<value> (0 for notinstalled AU)
InstalledBandwidth(MHz) :<value> (0 for notinstalled AU)
HWVersion :<value> (null for notinstalled AU)
HWRevision :<value> (null for notinstalled AU)
SerialNo. :<value> (null for notinstalled AU)
BootVersion :<value> (null for notinstalled AU)
IFVersion :<value> (null for notinstalled AU)
IFRevision :<value> (null for notinstalled AU)
Port1PowertoODU :<value>
Port2PowertoODU :<value>
Port3PowertoODU :<value>
Port4PowertoODU :<value>
Command
Modes
Global command mode
Parameter Description Possible Values
InstalledStatus Indicates whether an AU card is
installed in the slot.
Following parameters are
applicable only for installed AU.
 installed (1)
 notinstalled (0)