User Manual

Chapter 4 - Operation and Administration Using the CLI Managing AUs
4Motion 475 System Manual
4.5.5 Deleting an AU Object
Run the following command to delete an AU object:
npu(config)# no au <(1 to 4 StepSize 1) | (7 to 9 StepSize 1)>
4.5.6 Displaying Configuration and Status
Information for AU Parameters
You can display the current configuration and (where applicable) additional status
information for the following parameters tables:
 Properties (refer to Section 4.5.6.1)
Privilege
Level
10
Command
Modes
au-1 configuration mode
IMPORTANT
An associated AU (specified in a Sector Association) cannot be deleted.
Command
Syntax
npu(config)# no au <(1 to 4 StepSize 1) | (7 to 9 StepSize 1)>
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 4 StepSize 1) |
(7 to 9 StepSize 1)>
The slot ID of the AU card Mandatory N/A 1-4, 7-9
Command
Modes
Global configuration mode