User Manual

Chapter 4 - Operation and Administration Using the CLI Managing AUs
4Motion 471 System Manual
npu(config-au-1)# au-reserved [reserved-1 <string (32)>]
[reserved-2 <string (32)>] [reserved-3 <string (32)>] [reserved-4
<string (32)>] [reserved-5 <string (32)>] [reserved-6 <string
(32)>] [reserved-7 <string (32)>] [reserved-8 <string (32)>]
[reserved-9 <string (32)>]
4.5.3 Restoring Default Values for AU Configuration
Parameters
After enabling the AU configuration mode you can restore the default values for
parameters in the following parameters tables:
 Properties (refer to Section 4.5.3.1)
 Control (refer to Section 4.5.3.2)
 Connectivity (refer to Section 4.5.3.3)
 Reserved (refer to Section 4.5.3.4)
Command
Syntax
npu (config-au-1)# au-reserved [reserved-1 <string (32)>]
[reserved-2 <string (32)>] [reserved-3 <string (32)>] [reserved-4
<string (32)>] [reserved-5 <string (32)>] [reserved-6 <string
(32)>] [reserved-7 <string (32)>] [reserved-8 <string (32)>]
[reserved-9 <string (32)>]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[reserved-N <string
(32)>] (N=1-9)
Reserved parameter number
N
Optional null (an
empty
string)
A string of 32
printable
characters.
Command
Modes
au configuration mode