User Manual

Chapter 4 - Operation and Administration Using the CLI Managing AUs
4Motion 468 System Manual
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[required-type
{typeThree |
ttypeTwo} ]
Defines the AU card
configuration required.
In the current release only
typeTwo AU is available.
Optional typeThree
 typeThree
 typeTwo
[required-ports
{two | four} ]
Defines the No of AU card ODU
ports required.
In the current release only
four-ports AU is available.
Optional Four
 Four
[required-bandwi
dth {fourteen |
twenty |
notrequired} ]
Defines the AU card Bandwidth
(in MHz) required.
In the current release all cards
can support up to 20 MHz,
except to previous generation
cards that can support up to 14
MHz.
Optional Twenty
 Fourteen
 Twenty
 notrequired
[port-1-power
{shutDown |
noShutDown} ]
Controls power from AU card
port 1 to ODU
Optional No
Shutdown
 shutDown
 noShutDown
[port-2-power
{shutDown |
noShutDown} ]
Controls power from AU card
port 2 to ODU.
Optional No
Shutdown
 shutDown
 noShutDown
[port-3-power
{shutDown |
noShutDown |
NA} ]
Controls power from AU card
port 3 to ODU.
The NA (Not Applicable) option
is not relevant for a four-ports
AU.
Optional No
Shutdown
 shutDown
 noShutDown
 NA
[port-4-power
{shutDown |
noShutDown |
NA} ]
Controls power from AU card
port 4 to ODU.
The NA (Not Applicable) option
is not relevant for a four-ports
AU.
Optional No
Shutdown
 shutDown
 noShutDown
 NA
Command
Modes
au configuration mode