User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 419 System Manual
4.3.12.3 Displaying the Status of Performance Data Collection
To display whether collection and storage of performance data is enabled/disabled
for a group, run the following command:
To display the status for an NPU counters group:
npu# show group status {pmNpuBckhlPort | pmNpuMgmtPort |
pmNpuCascPort | pmAuPort | pmNpuIntMgmtIf | pmNpuExtMgmtIf |
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
{pmNpuBckhlPor
t
|pmNpuMgmtPor
t
|pmNpuCascPor
t
|pmAuPort |
pmNpuIntMgmtIf
pmNpuExtMgmtIf
|pmNpuLclMgmtI
f
|pmNpuBearerI
f
|pmSfa|pmDat
apathFn
|pmAaaC
lient
|pmAuthen
ticator
|pmCont
extFn
|pmDhcpPr
oxy
|pmDhcpRela
y
|pmDhcpServer
|pmIgmp|pmMsS
tateChangeFn}
For a description of each
parameter in this command,
refer
Table 4-22.
Mandatory N/A Refer to
Table 4-22
For NPU
groups
For AU
groups
{pmBsDeRegis
tration |
pmBsIntegrit
y|pmBsMobili
ty|pmBsNetwo
rkEntry|pmBs
Traffic|pmBs
Utilization|
pmBsGeneral|
pmbsallmsbas
icmode|pmbss
pecificmsadv
ancedmode}
For a description of each
parameter in this command,
refer to
Table 4-23
Mandatory N/A Refer to
Table 4-23.
Command
Modes
Global configuration mode