User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 417 System Manual
4.3.12.2 Disabling Collection and Storage of Performance Data
To disable collection and storage of performance data for one group, run the
following command:
To disable collection and storage of performance data for an NPU counters group:
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
{pmNpuBckhlPor
t
|pmNpuMgmtPor
t
|pmNpuCascPor
t
|pmAuPort |
pmNpuIntMgmtIf
pmNpuExtMgmtIf
|pmNpuLclMgmtI
f
|pmNpuBearerI
f
|pmSfa|pmDat
apathFn
|pmAaaC
lient
|pmAuthen
ticator
|pmCont
extFn
|pmDhcpPr
oxy
|pmDhcpRela
y
|pmDhcpServer
|pmMsStateChan
geFn}
For a description of each
parameter in this command,
refer to
Table 4-22.
Mandatory N/A Refer to
Table 4-22.
For NPU
groups:
For AU
groups
{pmBsDeRegis
tration |
pmBsIntegrit
y|pmBsMobili
ty|pmBsNetwo
rkEntry|pmBs
Traffic|pmBs
Utilization|
pmBsGeneral|
pmbsallmsbas
icmode|pmbss
pecificmsadv
ancedmode}
For a description of each
parameter in this command,
refer to
Table 4-23
Mandatory N/A Refer to
Table 4-23.
Command
Modes
Global configuration mode