User Manual

Chapter 4 - Operation and Administration Using the CLI Using the Command Line Interface for 4Motion System
4Motion 124 System Manual
4.1.5.1.1 Adding/Modifying Users
To add/modify a user, and assign a username, password, and privilege level, run
the following command:
npu(config)# username <name> password <password> privilege <0-15>
IMPORTANT
Only users who have logged in as root can execute this task.
IMPORTANT
An error may occur if:
 You are not logged in as the root.
 The username or password that you have specified is more than 20 characters.
 The privilege level that you have specified is not within the range, 0-15.
Command
Syntax
npu(config)# username <name> password <password> privilege <0-15>
Privilege
Level
root
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
username
<name>
Indicates the user name of
the user to be added.
Mandatory N/A String (up to 20
characters and
case-sensitive)
password
<password>
Indicates the password to be
assigned to the user to be
added.
Optional passwor
d
String (up to 20
characters and
case-sensitive)
privilege
<0-15>
Indicates the privilege level to
be assigned to a user. The
user will be permitted to
execute all commands for
which the privilege level is
equal to or lower than the
value of this parameter.
Mandatory N/A 0-15