User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 360 System Manual
Command
Syntax
npu(config-clsfrule)# config [priority <priority(0-255)>] [phs-rulename
<rulename>
] [iptos-low <value(0-63)>] [iptos-high <value(0-63)>]
[iptos-mask <value(0-63)>] [iptos-enable]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[priority
<priority(0-25
5)>]
Denotes the priority level to
be assigned to the
classification rule.
Optional 0 0-255
[phs-rulename
<rulename>]
Indicates the Packet Header
Suppression (PHS) rule name
to be associated with the
classification rule. Specify the
PHS rulename if you want to
perform PHS for this flow. For
more information about
configuring PHS rules, refer
Section 4.3.10.16.
Optional None String
An existing
PHS rule
name.
[iptos-low
<value(0-63)>]
Denotes the value of the
lowest IP TOS field to define
the lowest value where the
range can begin.
Optional 0 0-63
[iptos-high
<value(0-63)>]
Denotes the value of highest
IP TOS field to define the
highest value where the
range can end.
Optional 0 0-63
[iptos-mask
<value(0-63)>]
Denotes the mask for IP TOS
value.This mask is applied to
the TOS field received in the
IP header to be matched
within the TOS range
configured.
Optional 0 0-63