User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 322 System Manual
4.3.10.14.4.2.4Deleting Exclude IP Addresses for the DHCP Server
Run the following command to delete one or several excluded IP addresses for the
DHCP server:
npu(config-srvcgrp-dhcpserver)# no exclude-addr <no. of Addrs
(1-9)> <ipv4addr> [<ipv4addr>] …
Run the following command (without specifying the parameters) to delete all
excluded IP addresses for the DHCP server:
npu(config-srvcgrp-dhcpserver)# no exclude-addr
The deleted exclude IP addresses are no longer excluded when the DHCP server
allocates the IP addresses. That is, the server may allocate these IP addresses to
the MS.
Command
Modes
Service group-DCHP server configuration mode
Command
Syntax
npu(config-srvcgrp-dhcpserver)# no exclude-addr
no. of Addrs (1-9)>
<ipv4addr> [<ipv4addr>] …
Privilege
Level
10