User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 306 System Manual
4.3.10.13.1.5 Deleting the AAA Client
Run the following command to delete the AAA client:
npu(config)# no aaa-client [<client-alias>]
4.3.10.13.1.6 Displaying Configuration Information for the AAA Client
To display one or all AAA clients, run the following command:
npu# show aaa-client [<client-alias>]
Specify the AAA client alias if you want to display configuration information for a
particular AAA client. Do not specify a value for this parameter if you want to view
configuration information for all AAA clients.
Command
Modes
AAA client configuration mode
CAUTION
Specify the AAA client alias if you want to delete a specific AAA client. Otherwise all the configured
AAA clients are deleted.
In the current release, only one AAA client can be configured.
Command
Syntax
npu(config)# no aaa-client [<client-alias>]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[<client-alias
>]
Denotes the AAA client that is
to be deleted. If you do not
specify a value for this
parameter, all the existing
AAA clients, are deleted.
Optional N/A String
Command
Modes
Global configuration mode