User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 281 System Manual
4.3.10.10.3 Displaying Configuration Information for the CSN Interface
To display configuration information for the CSN interface, run the following
command:
npu# show csnif
4.3.10.11 Configuring Bearer Plane QoS Marking Rules
The bearer plane consists of tunnels between the ASN and CSN, and the BS and
the NPU. R3 includes the bearer plane methods such as tunneling for enabling
data transfer between the CSN and the ASN. R6 consists of the bearer plane
protocols that implement the intra-ASN data path between the BS and the NPU.
You can define QoS marking rules for the bearer plane, based on parameters such
as traffic priority, and the type of service, media, and interface.
Command
Syntax
npu(config)# no csnif [tun-mtu] [tun-chksm]
Privilege
Level
15
Command
Modes
Global configuration mode
Command
Syntax
npu# show csnif
Privilege
Level
1
Display
Format
CSN Interface Configuration :
ip-intf = <value>
tun-mtu = <value>
tun-chksm = <value>
Command
Modes
Global command mode