User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 275 System Manual
4.3.10.8.3 Displaying Configuration Information for the Context Function
To display configuration information for the context function, run the following
command:
npu# show contextfn
4.3.10.9 Configuring the MS State Change Functionality
The MS state change functionality manages MS states within an MS context. This
section describes the commands to be used for:
 “Configuring Parameters for the MS State Change Functionality” on page 276
 “Restoring the Default Configuration Parameters for the MS State Change
Functionality” on page 277
 “Displaying Configuration Information for the MS State Change Functionality”
on page 278
Command
Modes
Global configuration mode
Command
Syntax
npu# show contextfn
Privilege
Level
1
Display
Format
Context Function Configuration :
contextreq-retries = <value>
contextreq-interval = <value>
contextrprt-retries = <value>
contextrprt-interval = <value>
Command
Modes
Global command mode