User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 270 System Manual
[initpathregre
q-interval
<timeout>]
Denotes the interval, in
milliseconds, after which the
request for initial path
registration should be
complete. If the initial path
registration request is not
completed within this period,
the NPU may retransmit the
initial path registration
request.
Optional 1 10 - 3000
[msderegreq-re
tries
<retransmissio
ns>]
Denotes the maximum
number of MS deregistration
request retransmissions, after
which the MS is
de-registered.
Optional 3 0-5
[msderegreq-in
terval
<timeout>]
Denotes the MS
deregistration response
timeout, in milliseconds.
Optional 30 5-500
[pathregreq-re
tries
<retransmissio
ns>]
Denotes the maximum
number of times the NPU
may retransmit the path
registration request.
Optional 3 0-5
[pathregreq-in
terval
<timeout>]
Denotes the period, in
milliseconds, with which the
NPU should wait for the path
registration response. If a
response is not received
within this period, the NPU
retransmits the request.
Optional 10 5- 100
[pathregrsp-re
tries
<retransmissio
ns>]
Denotes the maximum
number of times the NPU
may retransmit the path
response.
Optional 3 0-5
[pathregrsp-in
terval
<timeout>]
Denotes the period, in
milliseconds, within which the
NPU should wait for an
acknowledgement for the
registration response. If a
response is not received
within this period, the NPU
retransmits the response.
Optional 10 5- 100