User Manual
Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 269 System Manual
[pathregrsp-interval <timeout>] [pathregstart-interval <timeout>]
[mipwaitdhcp-holdtime <timeout>]
NOTE
You can display configuration information for the data path function. For details, refer to
Section 4.3.10.7.3.
IMPORTANT
An error may occur if you provide an invalid value for any of these parameters. Refer the syntax
description for more information about the appropriate values and format for configuring these
parameters.
Command
Syntax
npu(config)# datapath [initpathregreq-retries <retransmissions>]
[initpathregreq-interval <timeout>] [msderegreq-retries
<retransmissions>] [msderegreq-interval <timeout>] [pathregreq-retries
<retransmissions>] [pathregreq-interval <timeout>] [pathregrsp-retries
<retransmissions>] [pathregrsp-interval <timeout>] [pathregstart-interval
<timeout>] [mipwaitdhcp-holdtime <timeout>]
Privilege
Level
15
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[initpathregre
q-retries
<retransmissio
ns>]
Denotes the maximum
number of initial path
registration request
retransmissions that may be
sent by the NPU. After the
number of retransmissions
has exceeded the value of
this parameter, the MS
de-registration procedure is
initiated.
Optional 3 0-5