User Manual
Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 264 System Manual
npu(config)# authenticator [eapidreq-retries <retransmissions>]
[eapidreq-interval <timeout>] [ntwentry-holdtime <timeout>]
[eaptransfer-retries <retransmissions>] [eaptransfer-interval
<timeout>] [reauth-attempts <counter>] [reauthcmplt-holdtime
<timeout>] [eaptransfer-roundtrips <counter>] [pmk-lifetime
<timeout>] [pmk-guardtime <timeout>] [authfailure-holdtime
<timeout>] [max-ntwentry <counter>]
NOTE
You can display configuration information for the Authenticator function. For details, refer to
Section 4.3.10.6.3
IMPORTANT
An error may occur if you provide an invalid value for any of these parameters. Refer the syntax
description for more information about the appropriate values and format for configuring these
parameters.
Command
Syntax
npu(config)# authenticator [eapidreq-retries <retransmissions>]
[eapidreq-interval <timeout>] [ntwentry-holdtime <timeout>]
[eaptransfer-retries <retransmissions>] [eaptransfer-interval <timeout>]
[reauth-attempts <counter>] [reauthcmplt-holdtime <timeout>]
[eaptransfer-roundtrips <counter>] [pmk-lifetime <timeout>]
[pmk-guardtime <timeout>] [authfailure-holdtime <timeout>] [max-ntwentry
<counter>]
Privilege
Level
15
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[eapidreq-retr
ies
<retransmissio
ns>]
Denotes the number of times
the NPU can retransmit the
EAP ID request until it
receives a EAP ID response.
Optional 3 0-5
[eapidreq-inte
rval
<timeout>]
Denotes the period, in
milliseconds, for which the
NPU should wait for the
response to the request for
the EAP ID.
Optional 500 10-100000