User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 258 System Manual
4.3.10.3.3 Displaying Configuration Information for the MIP-FA Functionality
To display configuration information for the MIP-FA functionality, run the
following command:
npu# show mip-fa
4.3.10.4 Configuring the Proxy-MIP Client Functionality
When the MS is MIP-incapable, the NPU provides the Proxy-MIP (MIP FA) client
functionality, and manages MIP registration between the MS and the HA. This
section describes the commands to be used for:
 “Configuring Parameters for the PMIP Client Functionality” on page 259
Privilege
Level
15
Command
Modes
Global configuration mode
Command
Syntax
npu# show mip-fa
Privilege
Level
1
Display
Format
MIP-FA Configuration :
allowed-mslifetime = <value>
agent-advertisements = <value>
advertisement-interval = <value>
Command
Modes
Global command mode
IMPORTANT
The Proxy-MIP client functionality is not supported in the current release.