User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 254 System Manual
4.3.10.2.2 Restoring the Default Configuration Parameters for the IGMP
Functionality
To restore the default configuration for the IGMP functionality, run the following
command:
npu(config)# no igmp [mcastrouter-version] [robustness]
[unsolicit-report-interval] [query-delaytime]
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[mcastrouter-v
ersion
<version>]
Denotes the IGMP version of
the multicast router.
Optional IGMPv3
 IGMPv2
 IGMPv3
[robustness
<retransmissio
ns>]
Determines the number of
retransmissions of the IGMP
reports sent by the NPU.
Optional 2 1 - 2^8
[unsolicit-rep
ort-interval
<timeout>]
Denotes the interval, in
seconds, between successive
retransmissions of unsolicited
IGMP reports sent by the
NPU.
Optional 1 1 - 100
[query-delayti
me <timeout>]
Denotes the interval, in
seconds, between general
queries sent by the multicast
router.
Optional 125 1 - 200
Command
Modes
Global configuration mode
NOTE
Refer to Section 4.3.10.2.1 for a description and default values of these parameters.
Command
Syntax
npu(config)# no igmp
[mcastrouter-version] [robustness]
[unsolicit-report-interval] [query-delaytime]
Privilege
Level
15