User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 243 System Manual
4.3.9.3.3 Deattaching an ACL from an Interface
Run the following command to de-attach an ACL from an interface:
npu(config-if)# no ip access-group {<access-list-number (1-199)> |
<access-list-name>}
IMPORTANT
An error may occur if:
 The ACL number/name that you have specified does not exist or is already attached to this
interface.
 You are trying to attach an ACL to an interface (other than the NPU/all AUs).
Command
Syntax
npu(config-if)# ip access-group {<access-list-number (1-199)> |
<access-list-name>}
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
{<access-list-
number
(1-199)> |
<access-list-n
ame>}
Indicates the number or name
of the ACL to be attached to
this interface.
Mandatory N/A
 1-99
 String
Command
Modes
Interface configuration mode
IMPORTANT
An error may occur if the ACL number/name that you have specified does not exist or is already
attached to this interface.
Command
Syntax
npu(config-if)# no ip access-group {<access-list-number (1-199)> |
<access-list-name>}