User Manual

Chapter 3 - Commissioning Completing the Site Configuration Using AlvariSTAR
4Motion 107 System Manual
3.2.5.2 Service Screen
3.2.5.2.1 Service Interface Tab
At least one Service Interface for data must be defined. If a dedicated management
station for CPEs is being used, a suitable Service Interface for management must
also be defined.
1 Click on the Add Service Interface button and configure the following
mandatory parameters:
» Service Interface Name
» Type
» Tunnel Destination IP (IP-in-IP Service Interface)
» Service VLAN ID (VLAN and QinQ Service Interface)
» Default Gateway IP Address (VLAN Service Interface)
2 Click Apply for the device to accept the configuration.
3.2.5.2.2 Service Groups Tab
At least one Service Group associated with a defined Service Interface for data
must be defined. If a dedicated management station for CPEs is being used, a
suitable Service Group associated with the defined Service Interface for
management must also be defined.
1 Click on the Add Service Group button and configure at least the following
mandatory parameters:
» Name
» Type
» Service Interface Name
» DHCP Function Mode
» DHCP Own IP Address
» External DHCP Server IP Address (Relay mode)
» IP Address Pool From (Server mode)