User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 570 System Manual
4.8.6.5.2 Displaying Configuration Information for Power Control Maximum
EIRP
To display configuration for the Power Control Maximum EIRP parameter, run the
following command:
npu# show pwrctrl-maxeirxp bs [<(1 to 16777215 StepSize 1)
Specify the BS ID if you want to display configuration for a particular BS. For
example, to display the Power Control Maximum EIRP parameter of BS 66053,
run the following command:
npu# show pwrctrl-maxeirxp bs 66053
Do not specify this parameter if you want to view configuration information for all
existing BSs. To display information for all BSs, run the following command:
npu# show pwrctrl-maxeirxp bs
Display
Format
(for each
existing BS
if requested
for all BSs)
BSIDLSB :<value>
NoiseandInterferenceLevelforCQI&ACKRegion :<value>
NoiseandInterferenceLevelforPUSCZone :<value>
Command
Modes
Global command mode
Command
Syntax
npu# show pwrctrl-maxeirxp bs [<(1 to 16777215 StepSize 1)
Privilege
Level
1