User Manual

Chapter 4 - Operation and Administration Using the CLI Managing ODUs
4Motion 489 System Manual
4.6.1.2.2 Configuring ODU Reserved Parameters
As the name implies, the reserved parameters table enables configuring up to 9
parameters that are reserved for possible future use. In the current release none
of the reserved parameters is being used.
To configure the ODU reserved parameters, run the following command:
npu(config-odu-params-1)# odu-reserved [reserved-1 <string (32)>]
[reserved-2 <string (32)>] [reserved-3 <string (32)>] [reserved-4
<string (32)>] [reserved-5 <string (32)>] [reserved-6 <string
(32)>] [reserved-7 <string (32)>] [reserved-8 <string (32)>]
[reserved-9 <string (32)>].
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible Values
[heater-existence
{TRUE | FALSE}]
Informational parameter
indicating whether a
heater for the ODU exists.
Optional FALSE
 TRUE
 FALSE
[external-cavity-filte
r-existence {TRUE
| FALSE}]
Informational parameter
indicating whether an
external cavity filter for the
ODU exists.
Optional FALSE
 TRUE
 FALSE
[required-odu-type
{...} ]
The required ODU type.
For more details refer to
Section 4.6.1.1
Optional The
previously
configured
valuw
For details refer to
Section 4.6.1.1
Command
Modes
odu-params configuration mode
Command
Syntax
npu (config-odu-params-1)# odu-reserved [reserved-1 <string (32)>]
[reserved-2 <string (32)>] [reserved-3 <string (32)>] [reserved-4
<string (32)>] [reserved-5 <string (32)>] [reserved-6 <string
(32)>] [reserved-7 <string (32)>] [reserved-8 <string (32)>]
[reserved-9 <string (32)>]