User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 543 System Manual
Specify the BS ID and Service Mapping Rule index if you want to display
configuration for a particular Service Mapping Rule. For example, to display the
order parameters of Service Mapping Rule 1 in BS 66053, run the following
command:
npu# show srvcmaprule-order bs 66053 rule-index 1
Do not specify these parameters if you want to view configuration information for
all existing Service Mapping Rules. To display information for all Service Mapping
Rules, run the following command:
npu# show srvcmaprule-order bs
Command
Syntax
npu# show srvcmaprule-order bs [<(1 to 16777215 StepSize 1)> rule-index <(1 to 255 StepSize
1)> ]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display the order parameters
of a specific Service Mapping
Rule. Do not specify a value
for this parameter if you want
to display the order
parameters of all Service
Mapping Rules.
Optional N/A 1-16777215
rule-index <(1 to 255
StepSize 1)>]
The Service Mapping Rule
index. To be used only if you
want to display the order
parameters of a specific
Service Mapping Rule.
Optional N/A 1-255