User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 542 System Manual
4.8.5.6.2 Displaying Configuration Information for Service Mapping Rule Order
Parameters
To display configuration for the order parameters of a specific or all Service
Mapping Rules, run the following command:
npu# show srvcmaprule-order bs [<(1 to 16777215 StepSize 1)> rule-index <(1 to
255 StepSize 1)>]
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display the general
parameters of a specific
Service Mapping Rule. Do not
specify a value for this
parameter if you want to
display the general
parameters of all Service
Mapping Rules.
Optional N/A 1-16777215
rule-index <(1 to
255 StepSize 1)> ]
The Service Mapping Rule
index. To be used only if you
want to display the general
parameters of a specific
Service Mapping Rule.
Optional N/A 1-255
Display
Format
(for each
existing
Service
Mapping
Rule if
requested
for all
Service
Mapping
Rules)
BSIDLSB :<value>
MappingRuleIndex :<value>
ServiceName :<value>
Command
Modes
Global command mode