User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 540 System Manual
npu(config-bs-66053-srvcmaprule-1)# exit
4.8.5.5 Deleting a Service Mapping Rule
Run the following command from the BS configuration mode to delete a Service
Mapping Rule:
npu(config-bs 66053)# no srvcmaprule <(1 to 255 StepSize 1)>
IMPORTANT
Do not forget to execute the apply command before terminating the BS Service Mapping Rule
configuration mode:
npu(config-bs-66053-srvcmaprule-1)# apply
Command
Syntax
npu(config-bs-66053-servmaprule-1)# exit
Privilege
Level
10
Command
Modes
bs service mapping rule configuration mode
Command
Syntax
npu(config-bs 66053)# no srvcmaprule <(1 to 255 StepSize 1)>
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 255
StepSize 1)>
The Service Mapping Rule
index
Mandatory N/A 1-255
Command
Modes
bs configuration mode