User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 527 System Manual
4.8.4.5 Deleting a BS Service
Run the following command from the BS configuration mode to delete a BS
Service:
npu(config-bs 66053)# no service <string (32)>
4.8.4.6 Displaying Configuration Information for BS Service
To display configuration information of a specific or all BS Services, run the
following command:
npu# show service bs [<(1 to 16777215 StepSize 1)> service-name <string (32)>]
Specify the BS ID and Service name if you want to display configuration
information for a particular Service. Do not specify values for these parameter if
you want to view configuration information for all existing BS Services.
Command
Syntax
npu(config-bs-66053-service-video)# exit
Privilege
Level
10
Command
Modes
bs service configuration mode
Command
Syntax
npu(config-bs 66053)# no service <string (32)>
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<string (32)> The Service name Mandatory N/A String
Command
Modes
bs service configuration mode