User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 525 System Manual
<(0 to 1500 StepSize 1)> ] [trgt-err-rate <(0.1 to 10 StepSize
0.1)> ]
4.8.4.3 Restoring Default Values for BS Service Parameters
After enabling the BS Service configuration mode you can restore the default
values for some or all of the non-mandatory parameters.
IMPORTANT
When creating a new Service, at least one of the Service parameters must be configured explicitly
(even if configured to the default value).
Command
Syntax
npu(config-bs-66053-service-video)# def [max-dl-rtx <(0 to 15
StepSize1)> ] [max-ul-rtx <(0 to 15 StepSize 1)> ] [max-subburst
<(0 to 1500 StepSize 1)> ] [trgt-err-rate <(0.1 to 10 StepSize
0.1)> ]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[max-dl-rtx <(0 to 15
StepSize1)> ]
The maximal number of
downlink retransmissions of
an HARQ sub-burst for this
servic
Optional 5 0 -15i
[max-ul-rtx <(0 to 15
StepSize 1)> ]
The maximal number of
uplink retransmissions of an
HARQ sub-burst for this
service
Optional 5 0 - 15
[max-subburst <(0 to
1500 StepSize 1)> ]
The maximal size of a
sub-burst in bytes for this
service
Optional 600 0 - 1500
[trgt-err-rate <(0.1 to
10 StepSize 0.1)>]
The target sub-burst error
rate for this service
Optional 1 0.1 to 10 in
steps of 0.1
Command
Modes
bs service configuration mode