User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 523 System Manual
4.8.4 Managing BS Services
The BS Service parameters affect the properties of the HARQ mechanism for each
Service.
4.8.4.1 Enabling the BS Service Configuration Mode\Creating a BS
Service
To configure the parameters of a BS Service, first enable the BS service
configuration mode for the specific service. Run the following command to enable
the BS service configuration mode. You can also use this command to create a
new service with default values.
npu(config-bs-66053)# service <(string (32))>
For example, to define a new service named video, or to enable the configuration
mode for an existing service named video, run the following command:
npu(config-bs-66053)# service video
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[<(1 to 16777215
StepSize 1)> ]
The BS ID
Specify a value for this
parameter if you want to
display the general
parameters of a specific BS.
Do not specify a value for this
parameter if you want to
display the general
parameters of all BSs.
Optional N/A 1-16777215
Display
Format
(for each
existing BS
if requested
for all BSs)
BSIDLSB :<value>
OperatorID :<value>
BSName :<value>
Command
Modes
Global command mode