User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 520 System Manual
4.8.3 Managing BS General Parameters
The general parameters of a BS include the Operator ID and the BS Name.
After enabling the BS configuration mode, you can execute the following tasks:
 Configure one or more of the general parameters (refer to Section 4.8.3.1).
 Restore the default values of one or all of the general parameters (refer to
Section 4.8.3.2).
You can display configuration information for the general parameters of a selected
or all existing BSs (refer to Section 4.8.3.3).
4.8.3.1 Configuring BS General Parameters
From the BS configuration mode, run the following command:
npu(config-bs-66053)# general [operator-id <(1 to 16777215 StepSize 1)>]
[bs-name <string (32)>]
Command
Syntax
npu(config)# no bs <(1 to 16777215 StepSize 1)>
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The unique ID (BSIDLSB) of
the BS.
Mandatory N/A 1 to
16777215
Command
Modes
Global configuration mode
To configure the BS General Parameters: