User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 676 System Manual
4.8.19.5.7 Displaying Configuration Information for Airframe Receive Parameters
To display configuration for the Airframe Receive parameters, run the following
command:
npu# show airframe-rx bs [<(1 to 16777215 StepSize 1)>]
Specify the BS ID if you want to display configuration for a particular BS. For
example, to display the Airframe Receive parameters of BS 66503, run the
following command:
npu# show airframe-rx bs 66053
Do not specify the BS ID if you want to view configuration information for all
existing BSs. To display information for all BSs, run the following command:
npu# show airframe-rx bs
Display
Format
(for each
existing
Neighbour
BS in each
of the
existing BSs
if requested
for all)
BSIDLSB :<value>
LogicalStramMappingChannel1 :<value>
LogicalStramMappingChannel2 :<value>
LogicalStramMappingChannel3 :<value>
LogicalStramMappingChannel4 :<value>
Command
Modes
Global command mode
Command
Syntax
npu# show airframe-rx bs [<(1 to 16777215 StepSize 1)> ]
Privilege
Level
1