User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 669 System Manual
Specify the BS ID if you want to display configuration for a particular BS. For
example, to display the Airframe General parameters of BS 66503, run the
following command:
npu# show airframe-general bs 66053
Do not specify the BS ID if you want to view configuration information for all
existing BSs. To display information for all BSs, run the following command:
npu# show airframe-general bs
Command
Syntax
npu# show airframe-general bs [<(1 to 16777215 StepSize 1)> ]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display the Airframe General
parameters of a specific BS.
Do not specify a value for this
parameter if you want to
display the Airframe General
parameters of all BSs.
Optional N/A 1-16777215
Display
Format
(for each
existing
Neighbour
BS in each
of the
existing BSs
if requested
for all)
BSIDLSB :<value>
CellID :<value>
PreambleGroup :<value>
SegmentNumber :<value>
FrameNumberOffset :<value>
EnableUplinkSubchannelRotation :<value>
Uplink-DownlinkAllocation(%) :<value>