User Manual

ManualsBrandsAlvarion Technologies ManualsElectronicsBreezeMax 4Motion Broadband Wireless System

171

172

173

174

175

176

177

178

179

180

Chapter 4 - Operation and Administration Using the CLI Managing BSs

4Motion 654 System Manual

4.8.19.2.7 Configuring Airframe Receive Parameters

To configure the Airframe Receive parameters, run the following command:

npu(config-bs-66053-airframe)# rx [adminchannel-1 {TRUE | FALSE}]

[adminchannel-2 {TRUE | FALSE}] [adminchannel-3 {TRUE | FALSE}]

[adminchannel-4 {TRUE | FALSE}]

[channel-3 {l1 |

l1slashL2 | Silence} ]

Defines which logical

stream is mapped to

physical channel #3.

l1: Logical Stream 1.

l1slashL2: Logical Streams

1 and 2.

Silence: None

If the ODU port associated

to port 3 of the AU

associated to this BS is "rx

only" (port-2 or port-4), the

only valid value is Silence.

If dldiversity mode (see

Section 4.8.19.2.3 is

“none”), valid options are l1

and Silence.

Optional l1

 l1

 l1slashL2

 Silence

[channel-4 {l1 |