User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 636 System Manual
4.8.16.3 Displaying Configuration and Status Information for DCD
Parameters
To display configuration and status information of DCD parameters, run the
following command:
npu# show dcd bs [<(1 to 16777215 StepSize 1)
Specify the BS ID if you want to display information for a particular BS. For
example, to display the DCD parameters of BS 66053, run the following
command:
npu# show dcd bs 66053
Do not specify this parameter if you want to view information for all existing BSs.
To display information for all BSs, run the following command:
npu# show dcd bs
Command
Syntax
npu# show dcd bs [<(1 to 16777215 StepSize 1)
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display DCD parameters of a
specific BS. Do not specify a
value for this parameter if you
want to display DCD
parameters of all BSs.
Optional N/A 1-16777215