User Manual

Chapter 4 - Operation and Administration Using the CLI Managing ODUs
4Motion 496 System Manual
4.6.1.6.2 Displaying Configuration Information for ODU Reserved Parameters
To display configuration information for the reserved parameters of a specific or
all ODU objects, run the following command:
npu# show odu-reserved [odu-no <(1 to 28 StepSize 1)>]
Specify the ODU number (1-28) if you want to display configuration for a
particular ODU. Do not specify a value for this parameter if you want to view
configuration for all existing ODU objects.
Command
Syntax
npu# show odu-reserved [odu-no <(1 to 28 StepSize 1)> ]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[odu-no <(1 to 28
StepSize 1)> ]
The number of the ODU
Specify a value for this
parameter if you want to
display the reserved
parameters of a specific
ODU. Do not specify a value
for this parameter if you want
to display the
reserved
parameters of all ODUs.
Optional N/A 1-28