User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 629 System Manual
npu# show nbr-all bs
4.8.15 Managing UCD Parameters
After enabling the BS configuration mode, you can execute the following tasks:
Command
Syntax
npu# show nbr-all bs [<(1 to 16777215 StepSize 1)> bs-id-lsb <(1 to 16777215 StepSize 1)> ]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display the Trigger Setup
parameters of a specific
Neighbour BS in a specific
BS. Do not specify a value for
this parameter if you want to
display the Trigger Setup
parameters of all Neighbour
BSs in all BSs.
Optional N/A 1-16777215
bs-id-lsb <(1 to
16777215
StepSize 1)>
The Neighbour BS ID.
Specify a value for this
parameter if you want to
display the Trigger Setup
parameters of a specific
Neighbour BS in a specific
BS. Do not specify a value for
this parameter if you want to
display the Trigger Setup
parameters of all Neighbour
BSs in all BSs.
Optional N/A 1-16777215
Command
Modes
Global command mode