User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 628 System Manual
4.8.14.6.5 Displaying Configuration Information for All Neighbour BS Parameters
To display configuration for the all Neighbour BS parameters, run the following
command:
npu# show nbr-all bs [<(1 to 16777215 StepSize 1)> bs-id-lsb <(1 to 16777215
StepSize 1)>]
Specify the BS ID and the Neighbour BS ID (bs-id-lsb) if you want to display
configuration for a particular Neighbour BS in a particular BS. For example, to
display all parameters of Neighbour BS 68000 in BS 66503, run the following
command:
npu# show nbr-all bs 66053 bs-id-lsb 68000
Do not specify these parameters if you want to view configuration information for
all existing Neighbour BSs in all existing BSs. To display information for all
Neighbour BSs in all BSs, run the following command:
TrigName
{scnReqCinrMin |
scnReqRssiMin |
scnReqRtdMax |
hoReqCinrMaxNbs |
hoReqRssiMaxNbs |
hoReqCinrMargin |
hoReqRssiMargin |
hoReqRtdMax |
hoReqCinrMinSbs |
hoReqRssiMinSbs} ]
The Trigger name
Specify only if you
want to display a
specific Trigger of a
specific Neighbour
BS in a specific BS.
Do not specify if you
want to display all
Triggers parameters
of all Neighbour BSs
in all BSs
 scnReqCinrMin
 scnReqRssiMin
 scnReqRtdMax
 hoReqCinrMaxNbs
 hoReqRssiMaxNbs
 hoReqCinrMargin
 hoReqRssiMargin
 hoReqRtdMax
 hoReqCinrMinSbs
 hoReqRssiMinSbs}
Display
Format
(for a
selected
Trigger)
BSIDLSB :<value>
BSIDLSB :value>
scnReqCinrMin :value>
Command
Modes
Global command mode