User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 619 System Manual
4.8.14.4 Terminating the Neighbor BS Configuration Mode
Run the following command to terminate the Neighbor BS configuration mode:
npu(config-bs-66053-nbr-68000)# exit
4.8.14.5 Deleting a Neighbor BS
Run the following command from the BS configuration mode to delete a Neighbor
BS:
npu(config-bs 66053)# no nbr <(1 to 16777215 StepSize 1)>
IMPORTANT
Do not forget to execute the apply command before terminating the Neighbour BS configuration
mode: npu(config-bs-66053-nbr-68000)# apply
Command
Syntax
npu(config-bs-66053-nbr-68000)# exit
Privilege
Level
10
Command
Modes
bs neighbour bs configuration mode
Command
Syntax
npu(config-bs 66053)# no
nbr <(1 to 16777215 StepSize 1)>
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to
16777215
StepSize 1)>
The Neighbour BS ID
(bs-id-lsb)
Mandatory N/A 1-16777215