User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 611 System Manual
[dcd-configchangec
ount <(0 to 255
StepSize 1)> ]
DCD configuration
change count of
neighbor BS
Should be taken from
displayed DCD
information for the
relevant BS (see
Section 4.8.16.3
Mandatory
When
creating a
new
Neighbour
BS.
N/A 0 - 255
eirx-pir-max <(-140
to -40 StepSize 1)>
The required effective
isotropic received
power at the Neighbor
BS for Initial ranging, in
dBm.
Should be taken from
Power Control
maxeirxp (see
Section 4.8.6.2.2)
Optional -124 -140 to -40
[frequency
<(2302.5 to 2357.5
StepSize 0.125) |
(2498.5 to 2687.5
StepSize 0.125) |
(3402.5 to 3597.5
StepSize 0.125) |
(3602.5 to 3797.5
StepSize 0.125)> ]
Downlink center
frequency of neighbor
BS.
Should be taken from
RF frequency
parameter of the
relevant BS (see
Section 4.8.17.2)
Mandatory
When
creating a
new
Neighbour
BS.
N/A
 2302.5 to 2357.5
in steps of 0.125)
 2498.5 to 2687.5
in steps of 0.125
 3402.5 to 3597.5
in steps of 0.125
 3602.5 to 3797.5
in steps of 0.125
restartcount <(0 to
255 StepSize 1)> ]
This value is
incremented by one
whenever the neighbor
BS restarts.
Should be taken from
displayed DCD
information for the
relevant BS (see
Section 4.8.16.3
Mandatory
When
creating a
new
Neighbour
BS.
N/A 0 - 255