User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 605 System Manual
Specify the BS ID if you want to display configuration for a particular BS. For
example, to display the Handover Negotiation at TBS parameters of BS 66053, run
the following command:
npu# show honegotiation-tbs bs 66053
Do not specify this parameter if you want to view configuration information for all
existing BSs. To display information for all BSs, run the following command:
npu# show honegotiation-tbs bs
Command
Syntax
npu# show honegotiation-tbs bs [<(1 to 16777215 StepSize 1)
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display Handover Negotiation
at TBS parameters of a
specific BS. Do not specify a
value for this parameter if you
want to display Handover
Negotiation at TBS
parameters of all BSs.
Optional N/A 1-16777215
Display
Format
(for each
existing BS
if requested
for all BSs)
BSIDLSB :<value>
DefaultActionTime(frames) :<value>
FastRangingallocations :<value>
Command
Modes
Global command mode