User Manual

Chapter 4 - Operation and Administration Using the CLI Managing ODUs
4Motion 493 System Manual
4.6.1.6 Displaying Configuration and Status Information for ODU
Parameters
You can display the current configuration and (where applicable) additional status
information for the following parameters tables:
 General (refer to Section 4.6.1.6.1)
 Reserved (refer to Section 4.6.1.6.2)
4.6.1.6.1 Displaying Configuration and Status Information for ODU General
Parameters
To display configuration and status information for the general parameters of a
specific or all ODU objects, run the following command:
npu# show odu-general [odu-no <(1 to 28 StepSize 1)>]
Specify the ODU number (1-28) if you want to display configuration and status
information for a particular ODU. Do not specify a value for this parameter if you
want to view configuration and status information for all existing ODU objects.
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 28 StepSize 1)> The ODU number Mandatory N/A 1-28
Command
Modes
Global configuration mode
Command
Syntax
npu# show odu-general [odu-no <(1 to 28 StepSize 1)> ]
Privilege
Level
1