User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 584 System Manual
4.8.8 Managing Neighbor Advertisement
Parameters
After enabling the BS configuration mode, you can execute the following tasks:
 Configure one or more of the Neighbor Advertisement parameters (refer to
Section 4.8.8.1).
 Restore the default values of one or all of the Neighbor Advertisement
parameters (refer to Section 4.8.8.2).
You can display configuration information for the Neighbor Advertisement
parameters of a selected or all existing BSs (refer to Section 4.8.8.3).
4.8.8.1 Configuring Neighbor Advertisement Parameters
From the BS configuration mode, run the following command:
npu(config-bs-66053)# nbradvertise [mininterval-normalload <(0 to 100
StepSize 0.1)>] [mininterval-highload <(0 to 100 StepSize 0.1)>] [triggersetup <(0
to 100 StepSize 0.1)>]
To configure the Neighbor Advertisement Parameters:
IMPORTANT
When creating a new BS, at least one of the Neighbour Advertisement parameters must be
configured explicitly (even if configured to the default value).
Command
Syntax
npu(config-bs-66053)# nbradvertise [mininterval-normalload <(0 to
100 StepSize 0.1)> ] [mininterval-highload <(0 to 100 StepSize
0.1)> ] [triggersetup <(0 to 100 StepSize 0.1)> ]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values