User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 581 System Manual
* The default value for the mandatory max-cqi parameter is be 7 for bw=5MHz and
19 for bw=7 or 10 MHz.
IMPORTANT
When creating a new BS, the mandatory max-cqi parameter must be configured. Typically it should
be configured to 7 for bandwidth=5MHz and 19 for bandwidth=7 or 10 MHz.
Command
Syntax
npu(config-bs-66053)# feedbackalloc [pr-cdma <(0 to 12000 StepSize
1)> ] [ir-cdma <(0 to 12000 StepSize 1)> ] [max-cqi <(0 to 29
StepSize 1)> ] [ert-poll-enable {true | false} ]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[pr-cdma <(0 to
12000 StepSize 1)> ]
The period of PR CDMA
allocations, in frames.
Cannot be higher than
ir-cdma (see below)
Optional 5 0 - 12000
[ir-cdma <(0 to
12000 StepSize 1)> ]
The period of IR CDMA
allocations, in frames
Optional 20 0 - 12000
[max-cqi <(0 to 29
StepSize 1)> ]
The maximum size
allowed for the CQI
region, in subchannels.
Mandatory
when
creating a
new BS.
N/A*
 0-11 for
bw=5MHz
 0-29 for
bw=7 or
10 MHz
[ert-poll-enable {true
| false} ]
Defines the BS's behavior
(whether polling is
enabled or not) upon
reception of zero size BW
requests.
Optional true
 true
 False
Command
Modes
bs configuration mode