User Manual

Chapter 4 - Operation and Administration Using the CLI Managing Sectors
4Motion 771 System Manual
4.9.1.6 Displaying Configuration Information for Sector Parameters
You can display the current configuration and (where applicable) additional status
information for the following parameters tables:
 Sector Definition (refer to Section 4.9.1.6.1)
 Sector Reserved (refer to Section 4.9.1.6.2)
4.9.1.6.1 Displaying Configuration Information for Sector Definition Parameters
To display configuration information for the Sector Definition parameters of a
specific or all Sector objects, run the following command:
npu# show sector-definition [sector-id <(1 to 6 StepSize 1)>]
Specify the Sector ID (1-6) if you want to display configuration information for a
particular Sector. Do not specify a value for this parameter if you want to view
configuration information for all existing Sector objects.
Command
Syntax
npu# show sector-definition [sector-id <(1 to 6 StepSize 1)> ]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
sector-id <(1 to 6
StepSize 1)>
The Sector ID
Specify a value for this
parameter if you want to
display the Sector Definition
parameters of a specific
Sector. Do not specify a value
for this parameter if you want
to display the parameters of
all Sectors.
Optional N/A 1-6