User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 763 System Manual
4.8.32.2 Displaying Configuration Information for BS Keep-Alive
Parameters
To display the BS keep-alive parameters, run the following command:
npu# show asn-keep-alive
bs [<(1 to 16777215 StepSize 1)
Command
Syntax
npu# show asn-keep-alive bs (<(1 to 16777215 StepSize 1)
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display the Keep-Alive
parameters of a specific BS.
Do not specify a value for this
parameter if you want to
display the Keep-Alive
parameters of all BSs.
Optional N/A 1-16777215
Display
Format
BSIDLSB Keep Alive Configuration
ASN-KA : <enable/disable>
Period (sec) : <value>
Retransmissions Count : <value>
Retransmission Time : <value>
Command
Modes
Global cpmmand mode